| Customization: | Available |
|---|---|
| After-sales Service: | More Than 10 Years |
| Warranty: | More Than 10 Years |
|
Still deciding? Get samples of US$ 0/Square Meter
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
GM13 HDPE Membrane for Landfill Pond Liner
First of all, make preparations to clean, roll and flatten the surface of the base layer to be laid; then take
the materials locally and fill the surface of the base layer with an excavator. The filled layer is not less than
30 cm thick and there is no loess If you want, you can use yellow sand or fine sand instead, fill up the soil
layer or sand layer, compact the soil protection layer, prepare for the next step, dig underground water to
guide the drainage, and distribute the drainage pipes.
Secondly, the soil protection base layer should be leveled and tamped, and the surface should be smooth
and smooth, and there should be no gravel over 2cm or obvious small pits; after checking that there is no
problem, the bentonite waterproof blanket will be naturally relaxed and flat Lay on the soil protection layer
with the non-woven fabric facing down and the woven fabric facing up. Note: The construction of bentonite
waterproof blanket should be carried out in rainless and snowy weather. In case of rain and snow, the plastic
film should be used to prevent the swelling of the bentonite in the waterproof blanket. The overlap of the
bentonite waterproof blanket is not less than 20 cm. Sprinkle bentonite lap powder evenly on the lap edge,
spray it to make it compact after pressing, and keep it flat. After laying, check the waterproof blanket for
damage and holes, repair it in time, and prepare for the next step.
In the 1980s, HDPE high-density polyethylene geomembrane, also called HDPE anti-seepage geomembrane,
also called anti-seepage membrane, was used in anti-seepage projects in landfills. With China's emphasis
on ecological environment and the increasing awareness of national environmental protection, anti-seepage
membranes are widely used in landfill disposal. Lay the HDPE impermeable membrane on the bentonite
waterproof blanket, stretch it flat, without large air bubbles, flatten it, and avoid heavy machinery such as
excavators rolling, turning or walking on the impermeable membrane; impermeable membrane and
anti-impermeable membrane The lapped edge of the membrane should be no less than ten centimeters,
and the edge should be kept clean and free of debris and stones; then prepare for welding. Before welding,
take two pieces of geomembrane of about one meter for test welding, adjust the reasonable temperature
of the welding machine, and then use a professional Welding personnel welding; welding should be carried
out simultaneously with the laying of impermeable membrane until the laying is completed. Note: During the
laying of the geomembrane, the excavator will cover the geomembrane slowly and evenly with soil on the side.
Welding and filling are carried out simultaneously to avoid artificial damage to the geomembrane; the protective
soil layer on the geomembrane is not lower than Thirty centimeters thick to prevent plant roots from piercing
the geomembrane, and then the soil is compacted.
Manufacturing Technique
HDPE Geomembrane liner are made from polyethylene polymer materials by the film-blowing
process.it is most widelyused for solid waste containment (such as landfill liners), mining and
water containment applications.
Item
| Product Name: | HDPE Geomembrane |
| Thickness: | 0.2mm-3.0mm(Main:0.5mm, 0.75mm,1.0mm,1.5mm,2.0mm) |
| Length : | 50m/roll,100m/roll,150m/roll or follow your request |
| width: | 1m-8m or follow customers' demand, Main width is 4m,5m,5.8m,6.0m |
| Surface | Both side smooth/both side textured one side textured one side smooth, or as your request |
| Color: | White,Black,Green,Blue,mainly black |
| Material: | HDPE,LDPE,LLDPE, ( 100% Virgin) |
| Certification: | ISO9001:2008, |
| Standard: | ASTM GRI-GM13 |
Main Features:
1.Waterproof and impermeable
2.UV resistance
3.High tearing resistance
4. Puncture-resisting
5.Nontoxic,non-tasteness. Long life:over 100 years underground without sunlight.
Geomembrane Parameter
| Thickness | 0.75 | 1.0 | 1.25 | 1.50 | 2.00 | 2.50 | 3.00 |
| Density g/m2 | ≥0.94 | ≥0.94 | ≥0.94 | ≥0.94 | ≥0.94 | ≥0.94 | ≥0.94 |
| Tensile yield strength (N/mm) | ≥11 | ≥15 | ≥18 | ≥22 | ≥29 | ≥37 | ≥44 |
| Tensile breaking strength (N/mm) | ≥20 | ≥27 | ≥33 | ≥40 | ≥53 | ≥67 | ≥80 |
| Bongation at yield(%) | ≥12 | ≥12 | ≥12 | ≥12 | ≥12 | ≥12 | ≥12 |
| Elongation at break(%) | ≥700 | ≥700 | ≥700 | ≥700 | ≥700 | ≥700 | ≥700 |
| Tear resistance(N) | ≥93 | ≥125 | ≥160 | ≥190 | ≥250 | ≥315 | ≥375 |
| Puncture strength(N) | ≥240 | ≥320 | ≥400 | ≥480 | ≥640 | ≥800 | ≥960 |
| Tensile load stress cracking | ≥300 | ≥300 | ≥300 | ≥300 | ≥300 | ≥300 | ≥300 |
| Carbon black content(%) | 2.0-3.0 | 2.0-3.0 | 2.0-3.0 | 2.0-3.0 | 2.0-3.0 | 2.0-3.0 | 2.0-3.0 |
Geomembrane Feature
1) Good physical and mechanic performance
2) High tearing resistance, strong deformation adaptability
3) Puncture-resisting, aging resisting, ultra-violet radiation, oil and salt, and corrosion resistance
4) Good adaptability to high and low temperature, non-toxicity, long service life
5) Good waterproof, drainage, anti-seepage and damp proof effects
6) Complete width and thickness specifications, low cost and easy installation
Geomembrane Application
1. Environmental Protection and sanitation: such as landfill, sewage treatment plant, power plant regulation pool, industrial and hospital solid waste, etc;
2. Water conservancy projects: such as seepage prevention, plugging, reinforcement, Canal seepage prevention, vertical core wall, slope protection, etc. of Rivers and Lakes reservoir dams;
3. Municipal Engineering: Subway, building underground engineering, planted roof, roof garden, sewage pipe anti-seepage;
4. Petrochemical: chemical plant, refinery, oil storage tank anti-seepage, chemical reaction tank, sedimentation tank lining, secondary lining, etc;
5. Agriculture: Reservoir, drinking water pool, storage pond, waste residue treatment field, and anti-seepage of irrigation system; 6. Aquaculture industry: intensive, factory breeding pond, fish pond, shrimp pond lining, sea water circle slope protection, etc;
7. Salt industry: Salt Field crystallization pool, halogen pool cover, Salt film, salt pool plastic film
Geomembrane Project Reference
HDPE Geomembrane-Application and our projects
Aquaculture (lining of intensive and plant type cultivation tank, fish pound and shrimp pool, side slope of sea cucumber ring etc.).
Environmental protection and environmental sanitation (living landfill yard, sewage & discharge liquid treatment plant, power plant adjusting tank, industrial and hospital solid waste etc.).
Water conservancy (anti-seepage, leakage blockage and reinforcement of river, lake and reservoir dikes and banks, anti-seepage of canal, vertical central wall, side slope etc.).
Municipal projects (underground project of subway and structure, anti-seepage of plantation roof and roof garden, lining of sewage pipe etc.).
Mine industry (heap leaching tank, tailings disposal, bottom lining and anti-seepage of washing and selecting tank, ash yard, dissolution tank etc.).
Traffic facilities (reinforcement of road foundation and anti-seepage of subway and tunnel).
Agriculture (anti-seepage of ditch, channel, reservoir, drinking water tank, pool and irrigation system).
Animal husbandry(biogas Pool etc.)
Landscape garden (man-made lake, river way, cistern, bottom lining and side slope of pool in golf course, waterproof and anti-seepage of greening lawn etc.).
Petrochemical industry (anti-seepage of oil tank of chemical plant, oil refinery and filling station, lining of chemical reaction tank and sedimentation tank etc.).
Salt industry (crystal tank of salt field, tarpaulin cover of halogenation tank, salt film, plastic tarpaulin cover of salt tank).
We can provide you the geomembrane welding machine
Company Introduction
){kind=link}